Linear Translation Stage VT-80: Low Cost Motorized Positioner

Key features
  • Travel: 25 - 300 mm
  • Max. Load: 5 kg
  • Max. Speed: 20 mm/sec
  • Max. Resolution: 0.2 μm
  • Repeatability: 0.4 μm uni-directional
                              +/- 10 μm bi-directional
  • Linear Encoder: Not Available

 

Datasheets: Low-Cost Precision Linear Stages / Precision Motorized Stages

The VT-80 linear translation stage is a popular, cost-effective motorized laboratory stage with a wide range of travel ranges. The positioner is guided by backlash-free re-circulating ball bearings and driven with a backlash compensated lead screw for quiet and smooth motion. All VT-80 linear translation stages are equipped with integrated limit switches. Closed-loop DC servo motors and 2-phase stepper motors are available. Additionally the VT-80 can be ordered as an intelligent stage with integrated controller. Due to the compact dimensions, VT-80 stages are especially suitable for lower duty cycle applications in instrumentation, for higher duty cycles, our ball-screw drives or linear motors are recommended. XY-stage combinations are easily assembled. 25 mm XY combinations need to be assembled at the factory. Please indicate set-up configurations when ordering.

 

Tech Note:
Performance of Direct-Drive Linear Motor Stages in Precision Positioning Applications

 

Tech Note:
Performance, Resolution, and Velocity Control of Stepper Motor-Driven Precision Positioners

 

Tech Note:
Advances in Precision Motorized Positioning Systems: Selection Criteria

 

Tech Note:
Improving Accuracy of Long Travel Linear Positioning Stages with Error Mapping